Wall insulation
Internal Wall Insulation
Insulation fitted to the inside of your external walls, room by room — a way to insulate solid-walled homes while leaving the outside of the house unchanged.
What internal wall insulation is
Internal wall insulation (often shortened to IWI) adds a layer of insulation to the inside face of your external walls, finished with a new plastered surface ready for decorating. It is mainly used on homes with solid walls — walls built without a cavity, common in many older houses — where there is no gap to fill.
It is usually done room by room, so you can insulate the rooms that matter most first, and it leaves the outside of the house exactly as it is. That makes it a natural choice where the front of a property cannot or should not change.
Is it right for your home?
Internal wall insulation is often worth considering when:
- Your home has solid walls and feels cold near the outside walls.
- You want to keep the outside appearance — brickwork, stone or a period frontage — unchanged.
- External insulation is not practical or permitted, for example in some conservation areas.
- You are already redecorating or renovating a room, so the disruption fits in with other work.
Most homes built with a cavity in the walls are insulated differently, by filling the cavity, and that is not what this service covers. If you are not sure which type of wall you have, the survey will tell you.
The trade-offs to know about
Internal wall insulation works well, but it is not a light-touch job, and it is better to know the downsides before you start:
- Some room space is lost. The insulation and new finish sit in front of the existing wall, so each insulated wall moves into the room a little. The exact thickness depends on the build-up chosen for your walls.
- Fittings come off and go back. Skirting boards, sockets and switches, radiators, curtain poles and sometimes kitchen units or built-in furniture on those walls need removing and refitting.
- It is disruptive while it happens. The rooms being worked on need clearing, and they will need decorating afterwards.
- Details matter. Window reveals, the junctions with floors, ceilings and party walls, and anywhere floor joists sit in the outside wall all need careful detailing so cold spots and condensation are not created.
Moisture comes first
Solid walls behave differently from modern cavity walls. Many older walls take up some moisture and dry out again over time, and adding insulation to the inside changes how warm and how dry the wall stays. If moisture is not managed, it can end up trapped behind the insulation, where it can lead to damp, mould or damage to timber.
That is why the materials and any vapour control layer are chosen to suit your particular walls, rather than using the same build-up everywhere. It is also why any existing damp has to be dealt with first — leaking gutters, failed pointing, bridged damp-proof courses or high ground levels outside are fixed before insulation goes on, not covered over.
Ventilation matters too. Once walls are insulated, a home can become more airtight, so the survey looks at how moisture from cooking, bathing and drying clothes will get out. Our page on mould and condensation explains why this balance matters.
The survey
Every job starts with a survey of your walls before anything is recommended. We look at how the walls are built and what condition they are in, check for signs of damp inside and out, note the windows, floors and fittings that will be affected, and look at ventilation in the rooms concerned. If something needs putting right first — a damp problem, a roof leak, failed pointing — we will tell you plainly.
Wall insulation work may also need to meet Building Regulations, and some properties, such as listed buildings, need consent before their walls are altered. We will explain what applies to your home, and if you live in a listed building or conservation area, check with your local planning authority before any work is agreed.
How the work is carried out
Our own installation team carries out internal wall insulation. In outline:
- The room is cleared and protected, and fittings on the walls being insulated are carefully taken off.
- The wall is prepared, with any loose or failed plaster and problem areas dealt with.
- The insulation is fixed to the wall, with any vapour control and the edge details at windows, floors and ceilings completed as specified.
- The new surface is finished with plaster ready for decorating.
- Skirting, sockets, radiators and other fittings are refitted, and the room is cleaned before we leave.
Your written quotation sets out which walls are included, the build-up we recommend and the order of work, so you know what to expect in each room.
Don’t forget the loft
Heat is lost through the roof as well as the walls, and loft insulation is usually simpler and less disruptive to sort out. If your loft is thin or poorly insulated, it is worth looking at loft insulation or a top-up at the same time.
Guarantee
Any guarantee that applies to internal wall insulation, including its provider, length, coverage and exclusions, is confirmed in your written quotation before work begins — see how our guarantees work.
Frequently asked questions
What is the difference between internal and external wall insulation?
Internal wall insulation is fitted to the inside face of your outside walls, room by room, and leaves the outside of the house unchanged. External wall insulation is fixed to the outside and finished with render or another weatherproof finish, so the inside is left alone but the look of the house changes. The survey helps decide which suits your home.
How much room space will I lose?
Each insulated wall moves into the room by the thickness of the insulation and its new finish. The exact figure depends on the build-up that suits your walls, and it is set out in your written quotation so you can see the effect on each room before you decide.
Can I stay in my home while the work is done?
Usually, yes. Internal wall insulation is done room by room, so most people stay at home. The rooms being worked on need clearing, and there will be some noise and dust, which we keep to the work area as far as we can.
Will internal wall insulation cause damp?
It should not, if the walls are surveyed properly and the work is designed and detailed well. Problems tend to come from insulating over existing damp, using materials that do not suit the wall, or leaving gaps at junctions and window reveals. That is why we check for damp and ventilation first and choose the build-up for your particular walls.
Do I need permission for internal wall insulation?
Wall insulation work may need to meet Building Regulations, and listed buildings usually need consent before their walls are altered. We will explain what applies to your home. If your property is listed or in a conservation area, check with your local planning authority before agreeing any work.
Is my home suitable if it has cavity walls?
Homes with cavity walls are usually insulated by filling the cavity, which is a different job and not what this service covers. Internal wall insulation is mainly for solid-walled homes. If you are not sure what kind of walls you have, the survey will tell you.
What happens to my radiators, sockets and skirting?
Fittings on the walls being insulated are carefully taken off and refitted once the new wall surface is finished. Your written quotation lists what will be moved, so there are no surprises.
How much does internal wall insulation cost?
It depends on the number and size of the walls, the build-up needed, how many fittings have to be moved and the condition of the walls. We survey first and give you a written quotation before any work is agreed.
Free, no obligation
Ready to arrange a free wall insulation assessment?
Tell us about your property and we will look at your walls, then provide a written recommendation and quotation before any work begins.