Wall insulation

External Wall Insulation

Insulation fixed to the outside of your walls and finished with render or another weatherproof finish — a way to insulate solid-walled homes without losing room space inside.

What external wall insulation is

External wall insulation (often shortened to EWI) wraps the outside of your house in a layer of insulation, which is then protected with a weatherproof finish such as render. It is mainly used on homes with solid walls — walls built without a cavity — where there is no gap to fill.

Because the work happens outside, your rooms keep their full size and life indoors carries on largely as normal. The trade-off is that the outside of the house changes, which is why the planning side needs checking early.

Is it right for your home?

External wall insulation is often worth considering when:

  • Your home has solid walls and you do not want to lose room space inside.
  • The outside walls need attention anyway — tired render, weathered brickwork or patchy previous repairs.
  • You would rather avoid the indoor disruption of insulating room by room.
  • A change to the look of the house is acceptable to you and allowed where you live.

Most homes built with a cavity in the walls are insulated differently, by filling the cavity, and that is not what this service covers. If you are not sure which type of wall you have, the survey will tell you. Where the outside must stay as it is, internal wall insulation may suit better.

Planning permission and consents

Because external wall insulation changes how your house looks from outside, you may need planning permission — particularly in a conservation area, on a listed building, or where the finish will look noticeably different from the neighbouring houses. Listed buildings generally need consent for changes like this, and some homes have other restrictions on them.

The rules vary, so check with your local planning authority before any work is agreed. Wall insulation work may also need to meet Building Regulations; we will explain what applies to your home as part of the survey.

What changes on the outside

Adding insulation to the outside makes the walls thicker, and everything fixed to them has to be dealt with. Depending on your house, that can include:

  • Extending the eaves and verges where the roof overhang is not deep enough to cover the thicker wall.
  • New or extended window sills so rainwater is still thrown clear of the wall.
  • Moving downpipes, gutters and cables out to the new wall face.
  • Extending or adapting vents, flues and boiler outlets, and repositioning items such as outside lights, satellite dishes and meter boxes where needed.
  • Details at the ground and roof line, door and window openings, and where your house joins a neighbour’s.

These details are a big part of doing the job well, and they are all identified at survey and listed in your written quotation.

Choosing a finish

The insulation is covered with a reinforced base layer and a weatherproof top coat. Render is the most common finish, available in a range of colours and textures, and other finishes may be possible depending on your property and what your planning authority will accept. We will talk you through the options that suit your house.

The survey and the condition of your walls

Every job starts with a survey before anything is recommended. We look at how the walls are built and what condition they are in, check for damp, look at the roof overhang, windows, doors and everything fixed to the walls, and consider ventilation inside the home. Walls need to be sound and dry before they are covered, so problems such as leaking gutters, cracking or penetrating damp are put right first, not hidden.

A better-insulated home can also become more airtight, so the survey looks at how moisture from everyday living will get out. Our page on mould and condensation explains why that balance matters.

How the work is carried out

Our own installation team carries out external wall insulation. In outline:

  1. Scaffolding goes up around the walls being insulated, and surrounding areas are protected.
  2. Downpipes, fittings and other items are taken off the walls, and the surface is prepared and any repairs made.
  3. Insulation boards are fixed to the walls, with starter tracks, edge trims and details at openings fitted as specified.
  4. A reinforced base coat and the chosen finish are applied.
  5. Sills, downpipes and fittings go back on, eaves are extended where needed, the scaffolding comes down and the site is cleared.

Rendering is weather-dependent, so some stages may need to wait for suitable conditions. Your written quotation sets out the scope and the order of work.

Don’t forget the loft

Heat is lost through the roof as well as the walls, and loft insulation is usually simpler to sort out. If your loft is thin or poorly insulated, it is worth looking at loft insulation or a top-up at the same time.

Guarantee

Any guarantee that applies to external wall insulation, including its provider, length, coverage and exclusions, is confirmed in your written quotation before work begins — see how our guarantees work.

Frequently asked questions

Do I need planning permission for external wall insulation?

You may. Because it changes how the outside of your house looks, permission may be needed — particularly in a conservation area, on a listed building or where the finish differs noticeably from neighbouring homes. The rules vary, so check with your local planning authority before agreeing any work.

Will external wall insulation change how my house looks?

Yes. The walls become slightly thicker and are covered with a new finish, usually render. Sills, eaves, downpipes and fittings are adjusted to suit. We talk through the finish options at survey stage so you know what the house will look like afterwards.

Do I have to move out while the work is done?

No. External wall insulation is carried out from the outside, so you can normally stay at home. There will be scaffolding and some noise while the work is under way, and access around the house may be limited at times.

What is the difference between external and internal wall insulation?

External wall insulation goes on the outside of the house, keeps your rooms their full size and changes the outside appearance. Internal wall insulation is fitted inside, room by room, leaves the outside unchanged but takes up some room space. The survey helps decide which suits your home.

Can external wall insulation be fitted to a terraced or semi-detached house?

Often, yes. Where your house joins a neighbour’s, the way the insulation finishes at the boundary needs planning, and it is sensible to speak to your neighbours early. These details are agreed at survey stage and set out in your quotation.

Is external wall insulation suitable for cavity walls?

Homes with cavity walls are usually insulated by filling the cavity, which is a different job and not what this service covers. External wall insulation is mainly for solid-walled homes. If you are not sure what kind of walls you have, the survey will tell you.

Will it cause damp problems?

It should not, if the walls are surveyed properly and the work is designed and detailed well. Existing damp, leaks and defects are put right before the walls are covered, and the details at windows, roof line and ground level are designed to keep water out. We also look at ventilation inside the home.

How much does external wall insulation cost?

It depends on the size of the walls, access and scaffolding, the finish chosen, the condition of the walls and how much needs moving or extending, such as sills, eaves and downpipes. We survey first and give you a written quotation before any work is agreed.

Free, no obligation

Ready to arrange a free wall insulation assessment?

Tell us about your property and we will look at your walls, then provide a written recommendation and quotation before any work begins.

Get Free Quote Call Us